Analyzer Components

Equipment Options and Upgrades

Gas Requirements and Purity

Specifications for the AutoChem III

  1. Bracket to hang Dewar shelf (2)
  2. Heating Mantle
  3. Ports for sorption trap, optional cold trap, and delay path
  4. LED light
  5. Mass Spectrometer port
  6. Sample tube release lever
  7. Furnace
  8. Septum port
  9. Vapor generator (optional)
  10. Front cover release
Analyzer Components

Component

 Description
Behind Front Cover (not shown)

Front cover is removed to expose the following:

  • Ethernet Port

  • Gas Inlet Ports (Carrier, Loop, and Preparation)

  • Exhaust Ports

  • Mass Spec connection

  • Air Source selector (Compressor or Tank)

  • Air In Valve

  • COM-1 Port

  • Air Filter
Furnace

Controls the temperature of the sample.

Heating mantle For use with the sorption trap.
LED light

When lit, indicates the communication between the analyzer and the computer.
Mass spectrometer port

To attach an optional mass spectrometer.
Ports For optional accessories (cold trap, sorption trap, delay path).
Sample tube release lever Use to release the sample tube from the sample tube port above the furnace.
Septum port

To inject gas into an analysis.
Shelf bracket (not shown) Bracket to support Dewar shelf
Vapor generator Allows analysis using vapors from liquids carried by an inert gas.