Air Filter Replacement

The air filter located below the analyzer should be replaced, as needed. A standard 16" x 20" 1" filter is used.

There are two methods for replacing the air filter:

  • Sliding the filter under the analyzer

  • Removing the front cover of the analyzer

Replace the Filter by Sliding it under the Analyzer

  1. Remove the existing filter.

  2. Slide the new filter into the tray under the analyzer.

  1. Push in the filter until it stops.

Replace the Filter by Removing the Cover

  1. Grasp the top and bottom of the front cover.

  1. Pull the cover forward and remove it.

  1. Remove the existing filter by sliding it out of the tray.

  1. Slide the new filter into the tray until it stops.

  2. Replace the cover by setting it back on the latches and pushing forward until it locks into place.