Graph Report Options

  • Active Gas Flow Rate and Temperature vs Time
  • Active Gas Flow Rate vs Temperature
  • Active Gas Flow Rate vs Time
  • Signal and Active Gas Flow Rate vs Temperature
  • Signal and Active Gas Flow Rate vs Time
  • Signal and Temperature vs Time
  • Signal vs Temperature
  • Signal vs Time [n]
  • Temperature vs Time

Any signal (the detector signal or the 1 or 2 auxiliary signal) may be plotted against time or temperature. Any signal can be overlaid onto the primary signal.

For color output to a monitor or printer, signals are displayed in different colors. For black and white output, different symbols are used.

Graph Report Options
Selections Description
Mass spec [group box]

Autoscale. When enabled on the report parameters windows, allows the x- and y‑ axes to be scaled automatically. Autoscale means that the x‑ and y‑ ranges will be set so that all the data is shown. If Autoscale is not selected, the entered range is used.
Options [button]

Enabled when the Show peak marks option is selected.

Lists the peaks for the results of the highlighted experiment. Select any (or all) peaks to include in the graph.

Select the peak labels to display on the graphs.
Overlay [group box] Specify overlay options to include in the report.
Selected Experiments
[group box]

Displays all related experiments in the current file. Only experiments with collected data are shown. This option is disabled for new files.
Show peak marks
[check box]
  • Enables the Options button to specify the peaks to include in the experiment.
  • Displays the areas and baselines on the graph.
  • Draws a straight baseline between the selected peaks.
X-axis [group box]

Specify Time or Temperature for the x-axis variable.

Autoscale. When enabled on the report parameters windows, allows the x- and y‑ axes to be scaled automatically. Autoscale means that the x‑ and y‑ ranges will be set so that all the data is shown. If Autoscale is not selected, the entered range is used.
Y-axis [group box]

Specify Time or Temperature for the y-axis variable.

Autoscale. When enabled on the report parameters windows, allows the x- and y‑ axes to be scaled automatically. Autoscale means that the x‑ and y‑ ranges will be set so that all the data is shown. If Autoscale is not selected, the entered range is used.

Linear/Logarithmic. Scales the graph as Linear or Logarithmic.

  For fields and buttons not listed in this table, see Common Fields and Buttons.