Evacuate Low Pressure

See also:

See Low Pressure in Analysis Conditions

Unit [n] > Evacuate Low Pressure

Select the type of sample when performing a low pressure evacuation. This window is also available using the Evacuation button on the Analysis Conditions tab.

Select if the sample is a Formed solid, Powder, or Other. If Other is selected, the remaining fields are enabled.

Evacuate Low Pressure Fields and Buttons Table
Field or Button	Description
Initially evacuate at	Enter the initial maximum evacuation rate.
Switch to medium at	Enter the method and pressure the system must reach before medium evacuation begins. Use pressure transducer User vacuum gauge Skip medium evacuation .
Switch to fast at	Enter the pressure the system must reach before fast evacuation begins.
Evacuation target	Enter the evacuation pressure.
Continue evacuating for	Enter the evacuation duration.

Micromeritics Learning Center Contact Us